A double-sided DIBOND lightbox is a remarkably elegant form of advertising, welded to form a single casing. It comes in many colours and finishes, which gives great possibilities of customisation. Its exclusive look is perfect for promoting brands that wish to stand out.

For custom orders, please, email us before your purchase.

The product is shipped ready for mounting.

Waterproof LED ip67 modules

Rear panel made of white PVC

Standard DIBOND colours

Milled cut-outs

Product Specification:

• DIBOND cover

• Cut-out design (3mm depth) lined with plexiglass sheet

• Hermetically sealed power supply installed within the lightbox

• Waterproof LED ip67 modules

• Welded construction

• Plexiglass sheet covered with ORACAL® 8500 Translucent Cal or printed foil, or with UV ink printed directly on the sheet, depending on the complexity of artwork (chosen by the manufacture team accordingly)

• Rear panel made of white PVC + aluminium construction

• The maximum size of DIBOND sheet is 400x150cm, including the folding edges

• Loose power supply wire

• 12-month warranty

Note: The product does not contain graphics. Please send us your design in the highest quality available to avoid delays.

Optional Features:

• LED RGB lighting (possibility to change colour with a remote control)
  
  

• 3D effect
  
  

• light sensor – for automatic turning on/off depending on the amount of daylight
  
  

• UV graphics printed directly on DIBOND
  
  

Artwork Requirements

Design must fit the following specifications:

Minimum resolution: 72 dpi

Colour pallete: CMYK

Scale: 1:1 (please make sure the delivered files are at a 1:1 scale)

Format: jpg, pdf, tiff, cdr

If your file is of low quality, we will not be able to print your lightbox artwork and you will be asked to send over a better-quality image, which will lengthen the entire process. When creating your design, please remember that your artwork should be setup at an equal proportion to the lightbox you are ordering.

Sample Lightboxes